Radio Systems CT-2002 Instruções de Operação descarregar pdf (Página 19)

Radio Systems, Inc. CT-2002 Manual

Page 19

To Adjust The Analog Clock Time (using a CT-2002

Master or GPS Driver)

1. Put the Master in set mode by pressing and holding the START and STOP but-

tons together for 3 seconds. The digital display will flash.

2. To add a second, push and release the STOP button. To subtract a second, push

and release the RESET button.

3. To add an hour (for Daylight Savings Time) push and hold the STOP button for

3 seconds. The analog clocks will run at double speed for exactly 1 hour. To

subtract an hour (for Standard Time) push and hold the RESET button for 3

seconds. The analog clocks will stop running for exactly 1 hour, then start

again.

4. Push the START button to resume normal digital clock operation.

Notes:

1. Adjustments made via the CT-2002 Master driver will effect any digital clocks

downstream.

2. On systems that utilize the AMD-1 analog clock driver, all time adjustments

should be made via this unit. Consult the AMD-1 manual for adjustment

instructions.

3. Daylight Savings and Standard Time adjustments are made automatically to

all digital and analog clocks connected to the GPS Master driver. The user

must manually initiate these functions if no GPS receiver is utilized.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Sem comentários

Radio Systems CT-2002 Instruções de Operação Página 19