Radio Systems CT-2002 Instruções de Operação descarregar pdf (Página 11)

Radio Systems, Inc. CT-2002 Manual

Page 11

Setup Functions

The IR Remote Control is used to set various functions of the CT-2002. With the

exception of “IR Remote Disable” these selections are stored if power is lost.

1. Press the Program Button. The “PGM” Led will illuminate. Repeatedly press-

ing the Setup Button will step the CT-2002 through the 10 menu choices.

2. The selections are changed either by pressing the “Clock” set button or using

the numeric keypad.

3. The Setup Mode is exited (and the selections are stored) by pressing either

the Clock Button or the Timer Button.

4. For a confidence check that your programming changes have been made and

stored, cycle thru the setup functions without making any more changes to

check that your entries “stuck”. Then press clock or timer to exist.

Option 1: 12/24 hour clock operation. Press the “Clock” set

button to toggle between 12 and 24 hour operation.

Option 2: Down timer stop at zero or count negative. Press the

Time-of-Day set button to toggle between hold at 0 and go

negative.

Option 3: Serial time of day format. Press the “Clock” set button to tog-

gle between Radio Systems-1 (rS1) format, Radio Systems-2

(rS2) format and SMPTE (SP) format .

“SMPTE” enable the serial input to read standard SMPTE

format (no drop frame ).

“rS1” enables the serial inputs to read Radio Systems serial

time of day format as generated by Radio Systems’ GPS,

Master, and stand-alone clocks.

“rS2” enables the serial inputs to read Radio Systems serial

time of day format as well as upstream timer displays. Note

that in this mode, the “Mem 6” and RESET keys on the IR

Remote control is retasked to allow switching between slave

and local timer functions.

Option 4: Serial time of day hour offset. Press the “Clock” set button to

select from 00 to 23 hour added to the serial time of day data.

Use option 11 to input minutes and seconds added.

Option 5: IR Remote Functionality. Press the “Clock” set button to

toggle between full functionality (iron), program defeat

(irPr), and no remote (irno).

In program defeat (irPr) the setup functions are locked out.

When AC power is toggled off and on, the remote returns to

full functionality.

In no remote (irno) all remote functions are ignored. When

AC power is toggled off and on, the remote returns to full

functionality. Use this function if there is more than one

clock in use in the same room.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Comentários a estes Manuais

Sem comentários

Radio Systems CT-2002 Instruções de Operação Página 11

Comentários a estes Manuais

Manuais e produtos relacionados com Temporizadores elétricos Radio Systems CT-2002