Radio Systems CT-2002 Instruções de Operação descarregar pdf (Página 4)

Radio Systems, Inc. CT-2002 Manual

Page 4

Radio Systems, Inc. CT-2002 Manual

Page 4

General Description

The CT-2002 series of digital clock/timers is a family of timing displays, a master

driver and a GPS driver.

Models

All Display Models: Will accept serial Time-of-Day and timer data in

Radio Systems format, or Time-of-Day (only) data in

SMPTE format. Provides up-timing as standard and

down-timing with the optional IR remote control.

Each display model (with V2005 or higher software)

will output serial data for Time-of-Day in Radio

Systems format.

CT-DESK 7” wide x 2.5” high x 4.5” deep Desktop clock/up-

down timer with 5/8” LED displays which functions

as a stand alone or slave time of day display with

wired remote control.

CT-THIN 7” wide x 2.5” high x 1.25” deep “stick-on” clock/

timer with 5/8” LED displays featuring the same

functions as the desktop unit, but in a smaller profile

cabinet.

CT-2INCH 15.25” wide x 5.25” high x 3” deep clock/timer dis-

play with 2” high LED display and the same features

set as the

“desktop” and “thin” units.

CT-4INCH 24.5” wide x 7” high x 3” deep clock/timer display

with 4” high LED display and the same features set

as the “desktop” and “thin” units.

GPS Models: Provide up-timing and output serial Time-of-Day data

in Radio Systems format.

Options

Infra-Red Remote Control Required for down timing and internal setup func-

tions. Also provides clock operation, Time-of-Day

Set and up-timer functions (for display units only.)

Included with Desktop & Large Display.

RS-485 Converter Installs in-line between the GPS satellite antenna and

clock/receiver. Required for cable runs in excess of 150’.

1 2 3 4 5 6 7 8 9 ... 27 28

Sem comentários

Radio Systems CT-2002 Instruções de Operação Página 4